Classic Cars / AC Cobra Replica / Car for sale
1967 Replica/Kit Makes AC Cobra
Sale price: $39,900.00 Make an offer
Car location: United States
Sale type: Fixed price listing
Technical specifications, photos and description:
- Make:
- Replica/Kit Makes
- Model:
- AC Cobra
- Year:
- 1967
- Type:
- Convertible
- Color:
- Red
- Mileage:
- 3,493
- Engine:
- 351 Cleveland
- Transmission:
- Tremec 5 Speed
- Trim:
- Convertible
- Interior Color:
- Tan/Black
- Vehicle Title:
- Clear
- Got questions?
- Ask here!
1967 Replica/Kit Makes AC Cobra for sale
Current customer rating:
() based on 354 votes
This
cobra replica was delivered as a complete car and not a kit. It was built by Specialty Motor Cars with
a staff of employees and craftsmanwith over 40 years of experience in the
design and production of Cobra replicas. Each frame is built using . 120 wall
2" x 4" rectangular tubing to reduce frame flex as commonlyfound in round tube chassis. SMC custom
build their own front cross member to accept Mustang II front suspension with power
assist rack and pinion. In addition an X brace
is welded in the center of the frame for
added strength. easily handling the torque producedby big blocks. The rear of the frame is
constructed to accept the Mustang GT rear suspensionwith four bar trailing arm design. Body: SMC bodies are hand laid and rolled.
using only the finest materials available (ISO resins). They use 4 layers of 2 oz. mat followed
by coremat and one 10 oz. layer of cloth. Steel
reinforcements are glassed in at all
stress and hinge points. Front Suspension: SMC uses an independent front suspension
with un-equal length upper and lower controlarms (Mustang II) with adjustable coil
over springs (type?) and disc brakes. Rear Suspension: The rear of the car uses Mustang GT
suspension with triangulated four bar trailing arm designand adjustable coil overs. A Pinion
snubber is welded in place to eliminate rear end squat. For stoping power the rear have also been
outfitted with disc brakes.
Drivetrain: This SMC Cobra is powered by a 351
Cleveland with a Weiand X-CELerator intake and a
650 Holley carburetor. Transmission is a
Tremec 5 speed and a 8. 8" 28 spline straight axle. Ignition uses a MSD ??The side pipes rumble at idle and
suprisingly docile while cruising at a steady 70 plus MPH on the
highway. Interior: Full vinyl interior in saddle tan with
updated carpet and Cobra mats. In addition Dynamat was installed to
improve on consistency of temparature control
and low noice levels which makes this
Cobra a pleasure to drive. Overall: This Cobra Replica is truly a pleasure to
drive whether in the city or on the highway. Car runs cool even in the hot Southern
California summers. The red (viper red) paint is flawless and
truly turns heads every where you go.
Built by SMC in 1997 with only 3. 00
miles. CA registration as a 1967 AC Cobra All Sales are As Is.
cobra replica was delivered as a complete car and not a kit. It was built by Specialty Motor Cars with
a staff of employees and craftsmanwith over 40 years of experience in the
design and production of Cobra replicas. Each frame is built using . 120 wall
2" x 4" rectangular tubing to reduce frame flex as commonlyfound in round tube chassis. SMC custom
build their own front cross member to accept Mustang II front suspension with power
assist rack and pinion. In addition an X brace
is welded in the center of the frame for
added strength. easily handling the torque producedby big blocks. The rear of the frame is
constructed to accept the Mustang GT rear suspensionwith four bar trailing arm design. Body: SMC bodies are hand laid and rolled.
using only the finest materials available (ISO resins). They use 4 layers of 2 oz. mat followed
by coremat and one 10 oz. layer of cloth. Steel
reinforcements are glassed in at all
stress and hinge points. Front Suspension: SMC uses an independent front suspension
with un-equal length upper and lower controlarms (Mustang II) with adjustable coil
over springs (type?) and disc brakes. Rear Suspension: The rear of the car uses Mustang GT
suspension with triangulated four bar trailing arm designand adjustable coil overs. A Pinion
snubber is welded in place to eliminate rear end squat. For stoping power the rear have also been
outfitted with disc brakes.
Drivetrain: This SMC Cobra is powered by a 351
Cleveland with a Weiand X-CELerator intake and a
650 Holley carburetor. Transmission is a
Tremec 5 speed and a 8. 8" 28 spline straight axle. Ignition uses a MSD ??The side pipes rumble at idle and
suprisingly docile while cruising at a steady 70 plus MPH on the
highway. Interior: Full vinyl interior in saddle tan with
updated carpet and Cobra mats. In addition Dynamat was installed to
improve on consistency of temparature control
and low noice levels which makes this
Cobra a pleasure to drive. Overall: This Cobra Replica is truly a pleasure to
drive whether in the city or on the highway. Car runs cool even in the hot Southern
California summers. The red (viper red) paint is flawless and
truly turns heads every where you go.
Built by SMC in 1997 with only 3. 00
miles. CA registration as a 1967 AC Cobra All Sales are As Is.
Want to buy this car?
Comments and questions to the seller:
Other classic AC Cobra Replica cars offered via internet auctions:
price: $51,995.001966 Shelby Cobra Replica
price: $43,881.00FORD COBRA GT REPLICA
price: $30,411.001965 Ford SC 427 Shelby AC Cobra Replica with 2000 Miles Build Sheet Motorsports
price: $US $20,955.001965 Replica/Kit Makes AC Cobra
Latest arrivals:
-
$45,000.000 -
$57,768.000 -
$26,994.000 -
$37,000.000 -
$49,900.000 -
$89,970.000 -
$40,000.000 -
$0 -
$45,000.000 -
$62,995.000 -
$30,659.000 -
$51,995.000 -
$43,000.000 -
$47,995.000 -
$48,000.000 -
$34,900.000 -
$59,000.000 -
$32,000.000 -
$59,990.000 -
$28,100.000