Fiat : Other 1500GT

Re-listing this. the interested buyer and I went over a lot more information and questions. which I will provide below. ultimately. he was looking for a more original car for a restoration project (this one missing it's original engine/gearbox and with modifications other than "from the factory). Hopefully this will answer most. if not all. of remaining questions about the Ghia.  Thank you.
1) I'm not clear on the status of the VIN tag.
The VIN tag is on the left side of the inner fender wall in the engine bay (if you can zoom in on the photo you can see it).   It reads:    GHIA                        GT1500CHASSIS# 382718    1. 00 KILOGRAMS (weight)

2) Has George figured out whether he has the title?
George holds a clean and clear title in his name. with correct # matching VIN to the chassis tag on the car.

3) Please explain the situation with the wheels.   You have the correct center caps but they are for a different type of wheel?
The Original wheels that came on this Ghia were Cromodora's.   He has the center caps for those wheels along with some Alfa center caps (from a Spyder).   The current wheels are the Dayton wires that you see on it. and he does NOT have center caps for these wheels.
4) Do the extra parts include headers for that engine?
Glad you asked and I can clarify this.   He does NOT have the exhaust system for the Ghia. the headers. or radiator.   Since a radiator will have to be accounted for when figuring out the front suspension. he never got around too it.   I'm not sure what type of headers your mech. quoted you. but this is just a basic Alfa 2. 0 block. headers are not hard to find. nor very expensive. and exhaust wise. I would recommend a custom bent pipe. to the Ansa tips.
5) Is all the glass good?
The front windshield is glass-plastic-glass layered. there is one small spot of condensation (I'm not sure it showed in photos) between the glass.   The rear shield is not glass. but like high tensile airplane plastic (material).   And that is in fine shape.
6) Is that the correct insert for the front grill?  If not. are the correct parts included?
There was no "grill" originally on Ghia 1500's (it was open).   He added the Alfa piece as his own part. you can remove it if you'd like.
7) Is that the correct steering wheel?
It is the correct steering wheel. with correct emblem.
8) Are all exterior and interior trim bits included such as all emblems. mirrors. license plate holder. etc. ?
Extra's and notables.  There is no "nose" badge. though a script "Ghia" approx. 3" long is included.  It will come with 2-3 different types of "GT" style bullet side view mirrors. rear view mirror. emblems. there is a chrome "square" style license plate holder (Maserati).  A big box of bits and pieces if you will :)
Also. nbsp;new KYB shocks. nbsp;MILSPEC wiring harness (very high grade). allory Fuel Pump/Regulator Series 140. nbsp;New Fuse Box (Italian. used in Ferrari's of the era). nbsp;Carb adapters are included for the Del's. nbsp;Magnetti Marelli Distributor w/ wiring. nbsp;Electric Radiator Fan. the brake boosters were re-done before he put it away. and yes. it has 4 wheel disc brakes.  *And note. the spare wheel is a cast wheel. not a matching wire.


The 1967 Ghia 1500GT is located in Valley Grande. AL. just outside of Selma. AL.   The owner George has owned it for a long time. but a Rolls project and other things have taken him away from finishing the car.   
Here are the details.
 A DropBox Link to all photos.
 https://www. dropbox. com/sh/5n91ikytpyrbv5t/AADsM8chZn3RPar8xHPWBq8_a?dl=0   
Body/Exterior/Interior/Issues  The car per his registration sits as a 1967.   Body Tag # 116. 382718.  The car has not been wrecked ever. the only work has been rear right tap that was repaired before any of the paint or bodywork was done as you see it now (it is a monocoque car though? so no frame?) Car is straight.   

It has an Alfa 5spd gearbox. which is NOT adapted to the rear end.   He has the proper drive shaft. but it does need to be trimmed to the correct size.   The present engine and gearbox combo have NOT been driven together as it sits right now (the orig. engine was Fiat Abarth)   The front-end needs a proper rack/pinion utilized. currently to fit in front of the radiator. or possibly a new steering cross member would solve the steering engineering aspect.   It has a big oil pan (race style) that sits low.   Correction on the wheels. they are 13" Dayton's. NOT Borrani's. and the existing center caps do NOT fit the wheels.   
George has all Veglia NOS instrument gauges for the cluster. but a dash face gauge board will need to be fabricated.   The present Carbs have been re-jetted. and the engine was built. pushing approx. 140+ hp. she is running Auto Delta Cams too (see spec pictures attached)   
There is NO rust underneath. maybe some surface/underspray. but the floors are great. rockers great. fenders/inner walls are fine.       
Engine   Please see the attached spec sheet. 1977 Alfa 2. 0 block.     *please note too. on the engine. all the bits are there.   
Extra's   There is a dual Ansa exhaust (tips). carburetors. gauges. and finishing pieces. all stacked on the storage shelf. they all go with the car.   As you'll see by the pictures. he had started the wiring and assemblies.     
The key parts are the paint is quite nice. there is one blemish on the left where the side-view mirror would go anyway.   With a buff. the paint will look even more fantastic. the car was not cleaned for the photos. I wanted to represent it for him exactly as it sits. Please feel to give me a call if you have questions. nbsp;203-770-0839 is my cell.   

All the usual eBay jargon.   

DO NOT BID ON THIS CAR IF YOU DON'T HAVE THE MONEY TO PAY FOR IT! NO RESERVE. PLEASE PAY ATTENTION TO THIS.   SHIPPING IS 100% THE BUYER'S RESPONSIBILITY. THE GHIA IS SOLD 100% AS IS. NO WARRANTY. WILL ASSIST AS MUCH AS POSSIBLE FOR ADEQUATE PICKUP TIMEFRAME AND HELP.  

Want to buy this car?