2012 Chevrolet Camaro

2012 Chevrolet "White Monster" Camaro History

This was originally a 2012 2SS fully optioned car. Before coming to Detroit Speed it was orginally used as a BF Goodrich tire test/tire launch car. The car has only 2124 original miles. For the build. it was totally disassembled and built with all new GM/race/aftermarket components. It had a lightened. solid GM roof panel installed as well as had the interior/tunnel doublers removed before being rotisserie painted inside. outside and the underside. The "White Monster Camaro" has been a One Lap of America SSGT Big Bore participant. a 2013 USCA Optima GT multiple class winner. a GoodGuys

All-American Sunday winner. a SCCA class winner and had the cover of Camaro Performers and feature in the July 2014 (last issue of Camaro Performers).

Suspension

Front Suspension

Detroit Speed. Inc. Front Speed Kit 3

• Front Anti-Roll Bar (1-1/8”)

• Front JRi Coilover Conversion Kit (Double Adjustable/Race)

• Front Anti-Roll Bar End Link Kit

• Caster Kit

• Adjustable Toe Link Kit

Rear Suspension

• Rear Anti Roll Bar (1-3/8”)

• Rear JRi Coilover Conversion Kit (Double Adjustable/Race)

• Rear Anti-Roll Bar End Link Kit

• Adjustable Lower Control Arms

• Adjustable Rear Trailing Arm Kit

• Revolver Solid Rear Cradle Mounts

• 4340 alloy steel tapered bull nose wheel lug studs with phosphate coating and phosphate coated alloy lug nuts

Engine/Drivetrain

• Mast 436 LS7 (approx. 680 hp) Dry Sump

• Dart Next Aluminum block

• MAST 305 Aluminum heads

• Callies crankshaft. Callies HD I-Beam rods. Diamond Pistons. COMP solid roller

• ARE 4-stage Dry Sump Pump

• ARE 3 gal Oil Tank

• Stainless steel hardlines to/from oil tank

• Harrop Hurricane Independent Throttle Body Intake (cable control)

• Custom carbon fiber plenums and cold air pan

• MAST Cast aluminum valve covers

• ARP fasteners

• Jones Accy Drive w/cartridge water pump

• C&R Radiator/Oil Cooler/PS Cooler

• Brown & Miller lightweight Plumbing

• Twin Squash Fuel Pump Module (dash-switched back-up pump)

• ZL1 Fuel Pickup Kit

• 1 7/8” Stainless Works Headers

• Full 3” Exhaust (Stainless Works resonators)

• Centerforce 8. 75” twin-disc Clutch

• Tilton T/O Bearing

• Bowler Performance T-56 Magnum (ZR1 2. 29 ratio set)

• Dynotech Alum Driveshaft

• Hammerhead Rearend. 4. 30. REM finish. Eaton True-Trac

• Setrab Rearend Cooler w/Tilton Electric Pump

• Driveshaft Shop HD Half Shafts

• ZL1 Hubs all 4 corners

• DSE adjustable engine mount kit

Body/Interior

• FIA NASA roll cage with body panel supports

• Sparco EVO Seats

• Schroth Profi-II Harnesses

• Woodward Lightweight Steering Column anodized w/alum quick release

• Sparco 383 Suede Steering Wheel

• AutoMeter LCD Dash System

• Custom carbon fiber Dash

• Custom carbon fiber false floors driver/passenger side

• Electric power Windows & Door Locks

• Optima Battery

• Safe-Craft On-board Fire System

• Custom SFI Left Side Window Net

• V/A Lightweight Heat/Defrost System

• Lokar interior door handle pulls

• Body/tunnel lightened

• Dry Sump tank mounted behind passenger seat with fully ventilated enclosure. Fresh air NACA ducts and through quarter panel dual exhaust fans evacuate cockpit

• Spare tire well removed. lightweight custom aluminum closeout

• Fabricated cross-car floor brace and driver side seat mounted in sub-cage

• Custom Front Splitter with supports

• Z28 Rear Spoiler

• ZL1 Rocker Moldings

• Lexan Rear Window w/custom aluminum fabricated bracing

• Custom aluminum rear diffuser

• Hidden class 1 receiver hitch (One Lap trailer compatible)

• American Autowire harness with mil-spec ¼ turn quick-disconnect connectors and fuse/relay center – passenger side dash

Wheels/Tires

• ZL1 Camaro wheels on all 4 corners

• Front: BFGoodrich Rival Tires 285/35/20

• Rear: BFGoodrich Rival Tires 315/35/20

Brakes

• Baer 6R Calipers (All 4 Corners)

• Baer 14” R-Spec Floating Rotors (All 4 Corners)

• Adjustable Bosch Motorsport M4 ABS

Spares

• Carbon fiber decklid setup with Crawford Composites carbon fiber Grand-Am GT Spec Wing

• Pratt & Miller Adjustable Wing Mounting System

• Dynotech Aluminum Driveshaft - fresh

• Camber Plate Assy

• DriveShaft Shop HD Half-Shaft Set - fresh

• Front & Rear Rotors

• ZL1 Wheel Hub

• Hammerhead differential - fresh

• Spare rear wheels

• Alternator

• P/S Pump

• Water Pump

• Clutch Master

• T/O Bearing

• Fuel Filter

• Optima Battery with quick-disconnect wiring

• Accy Drive Belts

• Misc. Hardware & Seals

• Custom Car Cover

For more information please contact: Kyle

info@detroitspeed. com

Also published at eBay.com

Want to buy this car?