Classic Cars / Porsche / Car for sale

Carrera Porsche 911 S T E RS

Sale price: $73,000.00 make an offer

Seller's notes: "This is a fully built clone of 1973 Porsche 911 Carrera RS. Two Year bare metal restoration. Basically every nut and bolt of this car has been removed / restored. 76 Base - VIN 9116200267"

Sale type: Fixed price listing

Technical specifications, photos and description:

Model:
911
Year:
1973
Mileage:
136,242
Engine:
2.7 Modified
Got questions?
Ask here!

Carrera Porsche 911 S T E RS for sale

Current customer rating: current rating for this car(2.15) based on 320 votes

CLONE 73 Porsche 911 Carrera RS  ** VIN 9116200267**

This is a full bare metal ground-up restoration… 100% CLONE 1973 Carrera RS with a 2. 7L Fully Built Motor including many new parts and attention to detail… the following.


BODY:


This Clone 73 Porsche 911 RS Carrera was built on a ‘76 Base; bare metal restoration including two-stage paint… taken entirely apart and rebuilt / restored. A two-year long nut and bolt level of complete restoration (see all photos). The entire floor has been built and is 100% rust free. It has aluminum foot boards and replaced holds original 73 body parts including 73 rockers. The Front fenders and hood are original 73. it includes fiberglass RS bumpers and RS Ducktail (see photos).

ENGINE:


Feshly REBUILT ENGINE 2. 7L .  has only a few hours on it
Case; line bored. new studs and “C” Certs; Rebuilt heads "S" cams re-ground for great and improved mid-range; Rockers hardened and ground; Nikasil Cylinders; Rebuilt carburetors. jetted and tuned. Rebuilt Distributor; Protronics Ignition; New Clutch and new clutch plate; fly wheel cut. New timing chains with “essential” new Carrera tensioner upgrade (see photos). idler pulleys. ramps. etc.  Headers. 11 blade fan; New alternator; New High torque starter; New sensors; New turbo valve covers; Installed Front Oil cooler with Stainless Steel Lines.

 

TRANSMISSION: Fully Rebuilt 915 Transmission (Vertex). $5000 uprgade!

SUSPENSION :

 

Upgrades / Replacement include:

1. New Turbo tie rod ends. 2. New CV Joints and boots. 3. New Bump Steering Kit. 4. Poly Graphite and solid swing arm bushings; 5. New Ball Joints; 6. New Tow hooks; 7. Tower Bar; 8. Rear sway bar (adjustable); 9. New Bilsteins (Green) – Struts / Shocks (see photos). Corner balanced

BRAKES:

This Clone 1973 Porsche 911 Carrera RS has had fully rebuilt brembo brakes including rebuilt calipers and stainless steel pistons. hawk Calipers rebuilt. Stainless Pistons. Hawk blue pads; Drilled front rotors. Stainless steel hoses and fully rebuilt pedal cluster.

This restoration also includes 1. New Clutch Cable. 2. New wheel bearings and seals. 3. Short shift kit including new bushings. 3. New CV Joints and boots. 4. New Fuel Cell and Electric Fuel pump setup

 

 

ADDITIONAL: New / Rebuilt / Restored detail

 

1. Steering wheel; Momo; 2. Alum. door covers; 3. Fresh 2-Stage Paint; in & out; 4. New Windshield & rubber; 5. New door seals  6. New front turn signals; 7. New ignition switch; 8. Custom bolt-in racing roll cage. Fuchs with Falken Azenis RT 615 205/50R15.




 

Also published at eBay.com

Want to buy this car?

Comments and questions to the seller:

Name E-mail
Text
Antispam code: (enter the number)

Other classic Porsche cars offered via internet auctions:

Latest arrivals: