Classic Cars in Canada / Porsche / Car for sale

Porsche : 914

Sale price: $35,600.00 make an offer

Car location: Lasalle, Quebec, Canada

Seller's notes: The only thing that hasn’t been touched as of yet, is the exterior paint, it would be considered a repaint by an amateur in ones honest opinion.

Sale type: Fixed price listing

Technical specifications, photos and description:

Model:
914
Year:
1973
Engine:
2.4 modified S
Got questions?
Ask here!

Porsche : 914 for sale

Current customer rating: current rating for this car(2.05) based on 310 votes

Up for Auction is a spectacular silver 1973 Porsche 914-6 Hybrid OUTLAW full custom restoration conversion.

This car is truly a remarkable piece of Porsche engineering machinery. it is practically a brand new car in a 42 year old body. far better than an original 914-6 in every way.  If  you're looking for a 914-6 Porsche that has been reengineered with all the latest state of the art components and some of the best Porsche outlaws behind the build. you've found something very unique and most definitely one of a kind.

The owner and solo builder is Jim Carruthers out of Montreal Canada.

His vision and priority for this restoration project bends towards clean lines . keeping its true Authentique period correct look that made Porsche so recognizable and popular in their earlier years. He is arguably guilty of discreetly adding many newer OEM improved  Porsche parts while also incorporating all the right high performance parts  with subtle custom choices and custom fabrication work. Just have a look at the detailed inventory build list below along with the photo video gallery and you will agree he has most definitely put together an amazing head turner.

In describing the total step by step process that goes into such a custom restoration build is truly a daunting task. A massive amount of focused energy was consumed. countless physical workmanship hours. parts searching. parts ordering.  As you continue reading you soon shall realize that hundreds and hundreds of hours were passionately devoted to all aspects of the project. including the technical research side of things.

 

 

 

 

 

 

 

He spared no expense in his effort. time and money to achieve his vision. Turning over every stone available to him. only seeking guidance and sourcing from many of the best masters in the industry.

Mike Galloway (mikes914s. com)

Henry Carraro (justporscheparts)

Eric Shea (pmbperformance. com)

Henry Schmidt (supertecperformance. com)

George Hussey. Doc 914” & Buffalo Drew (autoatlanta. com)

Chris Foley (tangerineracing. com)

Tarett Engineering (tarett. com)

Rich Johnson (a914guy@aol. com)

Chuck Moreland (elephantracing. com)

Tony Euganeo (daskeyman@comcast. net

Mark (914 Rubber. com)

Bruce Stone (bdstone914@aol. com)

Harvey  (Weidman's wheels)

Bruce Smith (bruce@cfi-auto. com)

Kenny (pelicanpart. com)

Fergies LOUVERS (rodineATshaw. ca)

 

 

 

 

 

THE CAR

Started its life as a very well preserved 1973 914 2. 0 S model. considered by most 914 aficionados to be the best year they were produced.

The Car has never Had ANY RUST ISSUES. Jim is the third owner. the second and third owner were from Manitoba Canada. The car has never been neglected. its chasse had 48000 original miles when Jim purchased the car. The newly rebuilt 2. 4 T motor highly modified to a  2. 5 911 S motor only has 1600 Kilometers.

The underside was degreased. steamed cleaned and scrubbed by hand; it took approximately one 40 hour work week to complete. the original undercoating was in perfect shape and you will see evidence of its condition by the photos below. It was decided to give the bottom underside including wheel wells several coats of Eastwoods epoxy paint just to give it another protective barrier even though it did not need it.

    The rear interior trunk compartment has been professionally sprayed to the original Porsche silver metallic. Every part in the rear trunk is new. including freshly painted hood hinges and Stainless Steel custom trunk hinge rollers. All pieces to mount Targa top and all new rubber as well. The Engine Bay was soda blasted then etching primer was added. then sprayed original colour code Porsche metallic silver and then finally clear coat was added. Also a new thicker custom fitted sound pad was installed using 3M adhesive including through bolted with oversized washers to prevent de-lamination in front of Alternator fan. The only thing that hasn't been touched as of yet. is the exterior paint. it would be considered a repaint by an amateur in ones honest opinion.

Everything else is powder coated. custom fabricated. new old stock. rebuilt. re-plated to new standards. high performance brand new parts and OEM parts from different years and different Porsche models.

 

 

 

the motor

914-6 STREET PERFORMANCE ENGINE

CUSTOM BUILT TO 2. 5 SPECIFICATIONS

 

The motor 3 911 2. 4 T modified to 2. 5 S 200 horse power with 40's Webber carburetion   configuration.

 

       2. 4 magnesium  case (line bore. case savers. oil bypass mod)

       86 mm aa pistons & biral  cylinders (9. 0:1 comp)

       Nikasil coating

       New pro-seal piston rings

       2. 4 crank (cross drilled. magged and polished) 70. 4 mm stroke

       Supertec head studs

       New main bearings

       New rod bearings

       Intermediate shaft bearings

       Aluminum 4 bar oil pump and pump modification

       New timing chains and ramps

       Turbo tensioners w/ chain savers

       Supertec tensioner arms

       Reconditioned rods w/ new bolts and nuts

       Recondition rockers and shafts

       Complete engine balance

       Complete valve job w maganese / bronze guides

       New exhaust and intake valves

       Surface heads

       Rebuilt alternator

       New fan belt.

       Powder coated & surface 930 valve covers

       Powder coated NOS OEM 9146 sheet metal

       Gold zinc coating on hardware

       Carburetor rejet and overhaul                  

       Replace heads 2. 2 t                                              

       Dougherty billet cams (dc 40)                                                                                                                                                                                   

       Head porting                                                         

       Machine turbo valve covers (lower)              

       Supertec head stud  kit                                            

       Custom fabricated nozzle early steel  factory air breather filter housing      

 

The motor is dressed by brand new original OEM NOS 914-6 engine tin that's been  powder coated stock black with new mounting hardware and new engine tin rubber all around engine bay to keep lower motor heat from entering upper level engine compartment.

 

 

Motor & Transmission Mounts

The motor was mounted with a custom 914-6 motor mount kit from Rich Johnson . it was welded to fire wall and then also through bolted to fire wall. all new mounting hardware and new OEM engine and transmission mount bushings including new mounting hardware too.

 

 

 

 

 

 

 

 

Engine Cooling System

               

       Original OEM 914-6 reconditioned oil tank. professionally internally cleaned. pressure tested. painted and also correct holes were drilled through rear quarter fender for a nice snug fit    

       Rare NOS 914-6 oil fill nozzle and cap with two new period correct vapour  soft oiled rubber lines exiting to motor                                    

       All new oversized oil lines including custom fabricated hard lines      

       All new oil line hardware including aluminum AN fittings                                      

       Custom fabricated 911 oil cooler by Rich Johnson

       Custom fabricated Aluminium secondary oil cooler by Henry Schmidt . fitted to a aluminium sandwich plate and four new AN fittings and lines that lead to secondary oil cooler    

The secondary oil cooler is fitted with four new 4 inch wide by 2 inch thick 12 volt cooling fans made by SPAL CUSTM FANS that draw 700 cfm's combined at 3amps a piece                  

                                                         

 

 

 

 

 

 

 

 

Fuel System

Starting up front the fuel tank was removed including the fuel expansion tank and also the charcoal canister. Then while tanks and canister were out the body under fuel tank steamed cleaned and then lightly sanded and prepped for a re-spray of original color to clean things up under tank area. Back to the tanks and charcoal canister. it was treated inside with POR 15. the process removes all old gas sediments and all condensation rust. final result produced a brand new epoxy lined tank. it was then fitted with a new gas bronze sock filter and the exterior of both tanks and canister were painted with three coats of chasse black satin from Eastwoods.

After that the two stainless tube extensions under the main fuel tank were cleaned overnight and new crush washers were fitted for a no leak application.

Next . high compression hoses were fitted with ZEBRA stainless washers.

After that comes a NOS rubber gasket that mounts through the front body of car where two new custom stainless steel race application gas tube lines from Tangerine Racing were fitted. they run through center channel inside car and exit in lower engine bay through fire wall. These lines are custom and made for race application and designed for safety. they are good for life and old rubber fuel lines will never rot and flood the inside of car.

From there more new bushings that mount at fire wall then high compression lines were fitted including a stainless down size line . after that comes new fuel filter and then a new low pressure electric fuel  pump made by Pierburg. Next two new rubber bushings and two new stainless rods that bring fuel through the motor tin. after that comes a new fuel regulator by PMO plus more fuel hose and zebra clamps that lead to the reconditioned Webber Carburetors. The throttle system leading back to the Webber Carbs is completely new starting direct from a new gas foot pedal to a new 914-6 custom throttle cable and then a complete new custom 914-6 throttle linkage from Rich Johnson. The throttle linkage bracket was mounted to transmission by drill and tap process. All new hardware and all linkage is yellow zinc dipped.

 

 

Exhaust System

The exhaust system starts with new exhaust gaskets at the motor and 914-6 connecting hardware (Allen head bolts that mount through the heat exchangers). As  mentioned above there are OEM rebuilt 914-6 header heat exchanger exhausts There is a new Dansk 914-6 OEM two in one out stock muffler joined by a NOS powder coated 914-6 muffler bracket and hardware followed by a new Dansk chrome OEM muffler Tip.

 

 

Heating system

The heating system started by examining the forward air defrost blower. it was found to be in great shape. After that the heater defrost control unit was removed and cleaned with electric contact cleaner several times. Next the red hand lever cap for the heat flap control was replaced with a shiny new OEM NOS one followed by a new OEM heat flap pull cable and hardware. After that two OEM NOS heat flapper boxes were installed with all new period correct OEM high heat hoses. Attached to two new heat flap boxes are two rebuilt OEM 914-6 heat exchangers painted with a ceramic coating.

 

 

 

 

 

 

 

 

Transmission & Shift Linkage

Starting with the shifter linkage. it was dismantled entirely. the shifter unit was thoroughly cleaned and re-lubricated. Then a new Delron fire wall bushing was installed followed by a new rubber boot cover. Then comes a new custom fabricated shift rod designed by Rich Johnson. its needed to be able to clear the 914-6 heat exchangers. Then it connects directly to shifter arm at transmission. there is one more very important brand new Delron bushing. followed by a new OEM protective cover. the shifts are precise tight and on the mark as good as day one. The transmission was in great working order since it only had 48000 original miles. it was removed degreased several times. cleaned by hand and several types of brushes were used to remove old dirt and grease. It was then decided upon to paint the transmission using Eastwoods high heat Alumi paint. It turned out sweet and now gives it that original bare aluminum look without the oxidization. The smaller stub axles and seals were removed and larger 911 ones were installed including new seals that mated up to new made in Germany CV Joints. After that  new Sway Away Heavy duty 930 size rear axles. There are several seals and bushings that makes up the 901 short shift transmission. all were replaced with OEM stock ones by Mike and Jim at Mikes 914's. It should be noted that the motor and transmission were joined with a new KEP clutch and new clutch plate and new throw out bearing including a new clutch arm bushing at mikes 914's shop. Also new Swepco transmission oil and a new fill oil plug including a new magnetic drain plug also a new copper ground strap to complete the drive train assembly. Also a new OEM clutch cable was installed with all new hardware and a freshly painted clutch cover plate.

 

 

 

 

 

Electrical System

       New 925 closed gel Odyssey battery with new GT aluminum mount bracket kit.

       New custom battery ground wire and starter wire with # 8 Allen hex head bolt install to battery.

       MSD 6al   ignition box                                                       

       NKG Custom plug wires. low  frequency disturbance. new  Bosch plugs. cap and rotor

       NOS 2 license plate lights /new gaskets with new bulbs

       New Bosch starter

       Brand new OEM Hella rear euro light lenses and bulbs.

       Custom motor wire harness made by Supertec performance

       New H4 Hella front head lights lenses and new H4 bulbs

       New turn signal splitter wire light bucket kit.

       Hella split euro amber/white lenses. gaskets and New Euro Italy side running light lenses and bulb and gaskets.

       All new OEM fuses

       All OEM new regulators

       New OEM fuse box cover

       New OEM engine lid light lens and bulb

       1968 911 NOS very rare mint condition Porsche script SAPHIRE AM/FM Radio.

       New Infinity speakers

       MSD high vibration coil        

       Complete Rebuilt and recurve to 135 degree Bosch ignition distributor. new cap and rotor. points and condenser by (Bruce Smith CFI)

       All wiring was joined by crimps then shrink wrapped or soldered then shrink wrapped

       The original circuit board was cleaned and MIKE Galloway at MIKES 914'S did a great job with the rewiring configuration.

 

 

Braking System

Let's start from the Top. the brake reservoir was dismantled. cleaned and put back in place with a new custom stainless strap and stainless hardware designed by Engman parts. unfortunately he is not with us anymore. he made after market aluminium and stainless parts for Porsche guys. Back to the reservoir. followed by two new period correct soft rubber material braided brake fluid lines that lead to new NOS OEM clear hard plastic lines and the correct rubber bushings and washer seals for a no leak fit that are led into a brand new bigger 19 mm ATE master cylinder. Same used for 911 cars. The entire triple foot peddle assembly was completely rebuilt and powder coated and zinc plaited including all new rubber bushings. seals peddle pads etc. rebuilt by Bruce stone. The interior wood foot board was replaced with a solid pure aluminium GT foot board by REDLINE CUSTOMS. The car is custom fitted with solid stainless steel brake hard lines front to back. also stainless braided soft lines front and back. purchased from Eric Shea at PMB performance. The front brakes are rebuilt anodized aluminium ATE dual circuit early S race calipers. found on many Porsche racing cars models of the 1960's. Designed for their ability to stop a racing thoroughbred and still recognized as the best application for the early cars and sought after to this day. The rear Brakes are brand new 914-6 aluminium cast calipers purchased from PMB performance. All bushings for the stainless brake hard lines are new. all mounting hardware for both front and back calipers are new including banjo fittings. New brake rotors front to back complete the brake system including new mount hardware. The original hand brake lines were in perfect condition. they were just adjusted and cleaned and lubed. The brake shields were re-plated with yellow zinc and look brand new.

 

 

Steering & Front Suspension System

The steering system is truly a joy when it comes to performance handling. its comprised of mating the original 914 steering shaft with a rebuilt 1986 911 Carrera steering rack. a new 914 shaft steering donut bushing was installed with a  cleaned up plastic cowling cover. Then mounted to a 1986 soda blasted  solid aluminium cross bar down below. all new hardware was used. Interestingly surprising how 1986 Carrera 911 front suspension parts can interchange and bolt up perfectly to the 1973 914 body. no body fabrication needed. A 1986 powder coated cover plate was used to protect the delicate body opening where the master cylinder and steering rack is housed. Then from their new lemforder turbo tie rods were connected. followed by new OEM 1986 ball joints. fitted to 1986 powder coated Boge Struts. with brand new Bilstien air gas shock inserts and end caps. The correct Bilstein insert compression for this particular cars suspension set up was chosen and endorsed direct from the Bilstein race department head office . The top mount shock bushings and hardware were cadmium plated for a pristine appearance. The original A-Arms were dismantled. soda blasted. cleaned. powder coated then the torsion bars were checked cleaned re-greased and inserted back followed by a new o-ring sponge seal  with a re-plated cadmium spleen end cap adjuster and bolt. The A-Arms were mounted with highest quality Elephant Racing new bushings. front and back including new Elephant bushing brackets and also new performance beveled washers and new hardware. The original front sway bar was replaced by a state of the art 19mm hollow Tarett Engineering one. with an adjustable connecting arm followed by adjustable drop links. Tarett Engineering is the premier set up for performance Porsche track and auto cross cars. 1986 911 Carrera hubs were soda blasted . then new OEM bearings were installed followed by a re-plated cadmium bearing cover cap and also new  rotors .

 

 

 

 

Rear Suspension System

For the rear suspension the original swing arms were sent to Chris Foley at Tangerine Racing were they were disassembled. then cut open and then weld reinforcement plates were added inside for  strength and to give stiffness to be able to handle the new 200 HP motor. The swing arms also arrived back powder coated with new bearings. new stainless axles. new bearing stainless plate covers. new axles seated in delron bushings. also new hardware and new powder coated orange custom mount brackets designed by Tangerine Racing that give ability for better adjustment settings.

At the other end of swing arm new Bilstein rear shocks with new 100 lbs stock Weltmeister coil springs.

The original rear sway bar was dismantled. then sand blasted. then painted with Eastwoods chasse black . new horse shoe bushings new horse shoe mounting brackets and new ball end Delron joint bushings.

The car has just had its second alignment by Andrew and the guys at WEETUNE in Lachine Quebec.

 

 

 

 

 

 

 

 

 

 

 

 

Wheels & Tires

The tires are brand new with 1500 kilometers on them. they are Avon CR6ZZ 185 70 R 15. (not sold in Canada) recommended by Harvey Weidman. professional track and pro street application. mounted and balanced professionally.

The wheels are Fuchs highly sought after deep dish 5. 5 X 15 inch. period correct for this car with the correct offset. The valve hole was custom bored to fit new style valve stems and now can fit tubeless or tubes. There are five wheels. they were shipped to Weidman's wheels in California. they were X-rayed for flaws. cleaned. polished. re-anodized to original factory spec and then finally painted. The centers were stripped of their anodized finish then re-anodized to match wheels. finally they were personally hand painted by his wife. The valves are race spec for safety. The whole process took 8 months including waiting time. Harvey is a very busy man and recognized as the right man for the job. One more thing. a brand new set of OEM aluminium painted lug nuts for the cherry on the cake!

 

 

 

 

 

 

 

Interior

The interior is immaculate and smells like a new car. everything inside was removed. the floor was steam cleaned and then treated with Eastwoods epoxy paint. great for preventing condensation rust. so even though there was no rust it was applied for future protection just like the underbody of the car. the front trunk. wheel wells and engine bay. The original floor sound padding is still there and in perfect shape. New black vinyl floor trim was installed replacing the old stuff to give it that fresh appearance to match the new carpet.

The carpeting was replaced and a new kit was special ordered from Lakewell car interior carpet specialist out of Belgium Europe. These guys were made famous for the Porsche 356 cars and other fine European sport cars. No cheap looking ferlon felt crap. the carpet is 100% charcoal wool. When entering the car you will notice that there are brand new custom polished Aluminium entry door sills with brand new rubber to make a nice seal. The hand brake and hand brake cable cover was removed disassembled cleaned and repainted its original black colour then reinstalled using new yellow zinc  hardware. Everything works . all dash lights . seat belt lights included.

The Interior is dressed with all original black German vinyl . no tears . nothing worn out . the dash is perfect. no sun beaten fading. super clean simply because it was hidden from the elements and well looked after. The seats are near perfect. there  is one seam coming loose about an inch long  high on top of driver's seat by head rest. barely visible. simple fix . just haven't had the time. The door handles are all working as they should . they have  been taken apart cleaned and lubricated. The window handles were replaced with custom chrome GT style ones. The seat adjuster pulls were replaced with custom polished aluminium ones made by Tangerine Racing. The dome light cover is replaced with a brand new OEM one including new bulb. All rubber trim was treated with silicon grease to help preserve rubber and to remove rubber squeak.

There are a set of new black rubber mats to protect the wool carpeting. they look great and are hex embossed. The front windshield glass was replaced and a special order one with a nice full slight tint was professionally installed.

The original 914 rear view mirror was replaced with a true NOS very rare 914-6 race mirror from AASE Porsche USA. It looks great . it's very narrow. designed for less obstruction when viewing forward.

 

 

 

 

Car keys

The keys are super cool. the originals were sent to daskeyman and he made two new original style Porsche 917 GT racing keys. their the coolest keys ever solid. heavy and fit like the car just rolled off the factory floor. That is a Canadian quarter same size as USA.

 

 

 

 

 

 

VDO Gages

There are five VDO gages in all. they were all sent to North Hollywood speedometer to be rebuilt . tested and refinished.

All  the ring bezels were replaced with early 356 Porsche ones and then chromed. very custom look one of a kind. they really pop. Also you will notice the early type chrome dot in all centers of the gages.

Temp and pressure gage

Was purchased from mikes 914's. it was from a 1968 Porsche 911 S model car. it was chosen because it gives accurate analog temp & oil pressure readings. A new oil pressure sending unit was installed on the motor to match the Gage.

The gage was rebuilt. tested. face repainted and new glass was added.

Tachometer gage

This gage was purchased from AASE Porsche and was Brand new in the box NOS stock. it was tested fitted for MDS electronics and face repainted with a 7500 rev line.

Speedometer gage

The Speedo gage is original to the car. it was serviced new glass added. face painted to kilometers and a small red line indicator was painted at 100 kilometers to remind one of the speed limit and then set back to zero.

Clock  gage

The old clock internal components were removed and then fitted with new quarts technology. no more dead clock problems. new glass was also installed and fresh face paint.

Gas gage

The gas gage is a custom gage made by North Hollywood. it has a red warning light as well . its brand new.

Volt meter gage

The volt meter gage was cleaned tested and new glass added including new face paint.

 

Exterior

Starting forward a NOS rare black rubber bumper piece that mounts on top of front bumper was purchased from MIKE'S 914'S. its real not after market. probably the only one in the country. cost a fortune. there famous for shrinking after years of sun and rain.

Next the front bumper was re- chromed by Altech custom plating in Montreal.

To top off the front bumper a new fiber glass LE type front valence spoiler was purchased from 914 limited and then had to be painted along with two new custom hand fabricated aluminium mounting brackets. . of course new hardware Allen key head bolts.

New wind shield squirts with new lines under hood that lead back to reservoir bottle.

New wiper blades.

New window side glass rubber trim.

New vinyl Porsche script.

Original antenna dismantled cleaned and re-lubed. still has original lock key.

The side valence skirts are original. then were removed. sand blasted then treated with Eastwoods then painted with three coats of black satin.

A very rare original 914-6 rear valence was purchased after searching for two years. it came with custom fabricated louvers designed to aid in the removal of hot air trapped in the engine bay area.

The rear engine lid was removed. the spring loaded rods were cut out to make room for the secondary oiler cooler to be positioned in their place supported by two stainless steel straps that attach by four small threaded studs that were welded to lid. The lid was shipped to British Columbia to Fergies Louvers were he pressed in custom louvers to allow air to flow more efficiently for the new secondary oil cooler set up.

The mesh grill was removed. sanded. repainted. then new OEM Porsche script letters were installed then fitted back with new rubber seals and new speed nuts finally fitted with two new custom stainless steel gas air shocks through bolted to both fire wall and lid it self.

Front hood and rear hood latches were removed and sent to Altech for new yellow zinc plating.

There are Original NOS polished aluminium body trim parts that are very rare that are awaiting installation.

The original mounting brackets for the tire jack behind the side valences trim both sides were completely cut out and  more robust insert plate was welded to the car in exact same position as the weaker original design ones. it served to purposes . it will never fail as the earlier originals often do and also it acts as a body stiffener to give it longitudinal strength.

Final words

The car is for sale. to date the cost to bring it to the current level is $55. 000. 00 US. not including any man hours. shipping costs and duties. To put things into perspective that's the value of a warn out ready for full restoration 1971. 972. 1973 911 same for an   original 914-6.  This car eats stock 911's and stock 914-6's for breakfast safely and efficiently. track or street. Looking for a new owner who appreciates the car and who knows the difference in a true complete custom Hybrid OUTLAW 914-6 restoration conversion build.  Now Excepting offers. serious offers will get a response. cheers

 

Note : hit links below to see all photos and videos of build

http://flashfix. ca/James9146/

https://www. youtube. com/channel/UC0K9EYZ80gvFkXSzrbAfLYw


Great time to take advantage of the currency exchange rate

Also published at eBay.ca

Want to buy this car?

Comments and questions to the seller:

from John Leenders, dated 27 october 2019
Is this car still for sale

Name E-mail
Text
Antispam code: (enter the number)

Other classic Porsche cars offered via internet auctions:

Latest arrivals: