Classic Cars / Ford / Car for sale

1974 Ford Bronco

Sale price: $55,000.00 make an offer

Car location: Norfolk, Virginia, United States

Sale type: Fixed price listing

Technical specifications, photos and description:

Got questions?
Ask here!

1974 Ford Bronco for sale

Current customer rating: current rating for this car(2.05) based on 51 votes
I'm selling the truck I swore I'd never sell.....   but only because I found an original unmolested 66' Bronco in excellent shape that I couldn't not buy and restore.   Selling my 74' to fund the restoration of the 66'.  I also feel bad for owning a truck like this with so much off road capability and never taking it off road.   I've owned this Bronco 5 years; I can't take credit for building it. I just made some made some improvements.   The build was a 5 year project, completed in 2014.  The builder was a genius, he really thought of everything.  He was a robotics engineer and his "attention to detail" is evident.  He saved all the build notes, cut sheets, receipts, manuals, etc.  He even created an electrical schematic on CAD that shows where every wire goes and has everything labeled using a wire label printer.   There is a lot of custom one off fabrication work that he had done to make this truck exactly how he wanted it.  Safety and reliability was clearly the priorities.  He sold it because they relocated to SC and there wasn't anywhere to use it for what he built it for.  On the outside it looks like a lifted Early Bronco but underneath it's all modernized (details below).  I've owned 9 Broncos (now 10) and they all basically drove like an old truck but this one is completely different.... I'm very comfortable (feel safe) driving this one even on the highway.   The amount of power it has is ridiculous but it's built more for torque so it's not jumpy.   

Engine:                    1990' 302 Bored 0.30 Over (331 ci) with DSS Stroker Kit (~450hp)

Transmission:          49R70W Automatic Transmission w/OD.  US Shift Controller

DESCRIPTION & INFO:

331 cubic inch stroker engine / DSS rating assembly kit (balanced with 50oz, 164 tooth flywheel). Edelbrock E Street Aluminum Heads E6SE (2.02 intake valves) Heads disassembled and upgraded valve springs/seats installed.1992 A9L EFI computer mounted on passenger side kick panel Edelbrock Performer 5.0 Upper/Lower intake with 1" Phenolic spacer JLT Performance Oil Separator 3.0 for for PCV valve back to intake 70mm Throttle body and 75mm ProM mass air meter calibrated to injectors by ProM 30lb fuel injectors, BBK adjustable fuel pressure regulator with oil filled gauge Rear frame rail Low Pressure fuel pump fed to BC Bronco's EFI Accumulator (custom mount / guard) High Pressure fuel pump mounted in finned aluminum heat sink on passenger frame rail All fuel line fittings use AN style where possible / 13 gallon plastic main fuel tank (aux tank removed) Custom passenger side exit exhaust with 3" high flow catalytic converter and muffler. All exhaust tubing Jet Hot ceramic coated inside and out from headers to the muffler Tri-Flo 4-core Aluminum Radiator with Derale HD Fixed Pitch Fan, puller electric aux cooling fan mounted in front of radiator (temp sensor controlled with toggle switch override option)Powermaster Starter 2000 Ford 4R70W Electronic OD transmission (complete trans rebuild when Advance Adapters kit installed) US Shift programmable transmission controller for 4R70W with all options wired in and custom switch panel Mag-Hytec extra capacity transmission pan with temp sensor for trans cooler fan Transmission cooler mounted into front bumper with integrated electric fan (temp controlled) D20 transfer case complete rebuild with master kit and twin stick option added Tom Woods Custom drive shaft front and rear (spare Tom Woods front shaft) Front axle: D44 with 4:56 gears on Richmond PowerTrax No-Slip locker, larger F150 axle shafts Front axle uses BC Bronco's Tie Rod Over conversion with all Heim joints Front axle BC Bronco's caster adjustable radius arms Rear axle: Ford 9" with 4:56 gears and factory limited slip (limited slip clutch pack replaced and entire axle rebuilt with all new bearings and seals) Front disk brake upgrade (from 76' Bronco/F150) with Stainless Steel extended brake lines (rebuilt with all new bearings and seals) Power Brake Booster and MC kit from BC Broncos IDIDIT tilt steering column and Lokar shift linkage to transmission Transmission gear indicator is a digital display on transmission controller, not on the column Power Steering w/ Hydro-Assist steering set up with quick ratio box (all parts from Redneck Ram) Derale Finned Power Steering cooler mounted horizontally behind front bumper Suspension lift 3.5" BC Bronco's - Rear 9 pack leafs Front rock crawler coils. Cross Enterprise rear inboard shock hoop, front extended F250 shock towers. 1 inch body lift to accommodate new transmission 35x12.5x15" BFG KM2 tires including spare, Pro-Comp 15x8 wheels Front and rear bumpers are Balie Bilt style with extensive custom fabrication upgrades Front bumper mounts moved down to eliminated body to bumper gap, flush mounted Rigid LED's, vertical cooling holes milled into lower bumper and trans cooler mounted in bumper, fabricated rock guard lip added to protect trans cooler Rear bumper has hinged trim panel to cover exposed 2" receiver tube, frenched in LED reverse lights, flush CB antenna mount, and custom fabricated tire carrier with High Lift jack mount160amp alternator with dual V-groove pulleys from BC Broncos Fabricated removable transmission tunnel cover with quick release fire extinguisher All Autometer gauges including oil temp and trans temp 6 point roll cage integrated into the frame rails with dash and ceiling mounted speakers.  Wired for CB radio and antenna but not installed.    Rear section side mounted gear storage boxes with integrated rear speaker mounts (boxes and all speakers are waterproof) Wild Horses fold and tumble rear seat, Bestop front seats with custom passenger seat lift mechanism (up 6" - fwd 10") to allow access into back seat BC Bronco's full framed safari soft top with removable side and rear panels Smittlybuilt 8500lb winch with synthetic line New Optima Battery 13 inch wiper arms from 98 Jeep Cherokee.   Only left on my "to do list" is to replace the front floor pans.   The previous owner put metal over the original pans because there's rust holes in them.  So it looks fine from inside but that's the only rust at all on the truck so I planned to do it right and replace the pans.  

I have a lot of spare parts that will convey with the truck.  

Also published at eBay.com

Want to buy this car?

Comments and questions to the seller:

Name E-mail
Text
Antispam code: (enter the number)

Other classic Ford cars offered via internet auctions:

Latest arrivals: