Cobra, Replica, 1965

Please contact me to see or test drive.

v  a FORD 331 Stroker H. O. EFI Engine and TREMEC 3550 - 5 Speed Manual Transmission 28 Spline completely overhauled from 1991 Mustang GT 5. 0. along with the following additions:

Ø  Lunati roller camshaft - P/N 51027LUN

Ø  Holley upper and lower intake manifold - P/N 300-72S

Ø  Holley double roller timing chain and gears

Ø  Holley aluminum cylinder heads (1. 94 / 1. 60) - P/N 300-573

Ø  Hardened push rods - P/N 301-32

Ø  ARP cylinder head bolts - P/N 301-31

Ø  Holley 70mm Ford throttle body - P/N 112-500 and 70mm EGR spacer - P/N 112-550

Ø  Holley 30 lb. /hr. fuel injectors

Ø  Holley adjustable fuel pressure regulator - P/N 512-500-1

Ø  76 mm mass air flow meter

Ø  SCAT 4340 Forged Crank / Connecting Rods / “I” beam with Big End Wt. = 393 & Small End Wt. = 159

Ø  ARP hardened pitons

Ø  PAINLESS WIRING Harness – P/N 60510 & 60511

Ø  PROFORM Chrome GM Alternator – P/N 66445

Ø  MSD 2225 High Pressure Electric Fuel Pump

Ø  20 Gallon Aluminum Fuel tanks with braided fuel Lines and AN fittings

Ø  MSD 8579 Ignition distributor and wires

Ø  MSD 8227 Performance Coil

Ø  CANTON Oil Cooler Adapter Kit with Remote Filter Base and Bypass Adapter

Ø  Custom Aluminum Radiator w/ Dual Electric Fans on the front & a Single Recirc Fan on the back

Ø  Custom ceramic coated headers and side pipes

Ø  McLeod Clutch Hydraulic Slave Cylinder

Chassis:

v  Custom built Box Steel Frame complete Black Power Coated with the following:

Ø  JAGUAR Independent Rear Suspension with 3:54 Gear Differential along with Adjustable Trailing Arms and 4 Adjustable Shocks

Ø  Ridding on the rear are 17X10. 5 Shelby Cobra Silver Bullitt wheels wrapped in NITTO 315/35R17 Low Profiles Tires

Ø  Custom Coil-Over Front Suspension with WILWOOD Vented Rotors. WILWOOD 4 Piston Calipers. Custom Tubular A-Arms. Adjustable Coil-Over Shocks. Adjustable Caster and Camber and 5/8" Diameter Stabilizer Bar

Ø  Ridding on the front are 17X9 Shelby Cobra Silver Bullitt wheels wrapped in NITTO 245/45R17 Low Profiles Tires

Ø  Intermediate Steering. Needle Bearing Joints. Steering Linkage and Splined Shaft

427 Style Fiberglass Body:

v  Hand Laminated Fiberglass Tub Style Body finished in the following:

Ø  The Outer shell. doors. hood and trunk are custom finished. primed and painted with 4 coats of CADILLAC CTS Switch Blade Silver Metallic - WA730S. and 8 coats of Clearcoat.

Ø  The engine compartment. wheel wells and rest of the underside of the shell is coated with black RHINO LINER which provides durability and protection against abrasion. corrosion. and vibrations.

Ø  The cockpit / tub and transmission tunnel is coated with LIZARD SKIN Ceramic Insulation which is an advanced. water-based composition of a high-grade acrylic binder with ceramic insulation particles to create a thermal barrier which reduces the interior by 30°F or more. making for a cooler. more comfortable ride. along with Aluminum Engine Compartment Panels. 2 Inner Fenders. Firewall and Foot boxes.

Ø  Authentic Lights with Custom Chassis Harness

Interior:

v  Cockpit / Tub and Trunk includes:

Ø  Includes Performance STEWART WARNER Gauges: 3 3/8" 160 MPH Speedometer. 3 3/8" 8000 RPM Electronic Tachometer. 2 5/8" Ammeter. Oil Pressure. Fuel. Water Temperature. and Oil Temperature.

Ø  WILWOOD Brake and Clutch Pedals. with 3/4" WILWOOD Master Cylinders

Ø  Leather Seats with CROW - 5 Point Safety Harnesses

Ø  Vinyl Dash and Door Panels

Ø  Chrome Bent Shifter with Hurst Style Shifter

Ø  Chrome Emergency Brake

Ø  Black Carpet with Custom Floor mats

Ø  Kenwood Stereo with 4 Speakers

Ø  Optima 12v 800 CCA Red Top Spiral Wound Automotive Battery OPT-34/78

Also published at eBay.com

Want to buy this car?