Classic Cars / Austin-Healey / Car for sale

1965 Austin-Healey sprite project mg midget spridget - OFFERS ACCEPTED

Sale price: $4,500.00 make an offer

Car location: Wesley Chapel, Florida, United States

Sale type: Fixed price listing

Technical specifications, photos and description:

Year:
1965
Got questions?
Ask here!

1965 Austin-Healey sprite project mg midget spridget - OFFERS ACCEPTED for sale

Current customer rating: current rating for this car(2.05) based on 554 votes
Vintage sprite. The entire chassis was blasted and powder coated then Base Coat Clear Coat paint was matched. body work completed and sprayed. There is NO filler in the car all metal was replaced a skim coat was used only. Glass front end is glass with louvers and the rear deck is glass as well. Both doors are aluminum I used the original door as a buck. I built a raised dash bubble to except the RPM gauge and the half moon steel piece is there to except a lexan shield. All panels you see in gray have been powder coated as well as all suspension components. The cage is 4130 1. 375 X. 095 TIG welded tubing and was constructed to meet SCCA requirements for a 1500lbs to 2500lbs pound production car. The top hoop to front hoop (located under the dash) helmet clearance will meet up to a six foot driver however the seat could be lowered.   The front and rear suspension is a tube shock conversion kit spridgetmania. com/part/1600-FLD/Tube-Shock-Conversion-Kit-Spridget-Front The chassis and rear end have mounts for a pan hard bar and the rear end has new 2" lowered springs mounted on a slider to maintain rear and yoke angle. the rear end and chassis has provisions for a radius link. Rear end is freshly rebuilt with a racing spring limited slip from phantomgrip. com . The front spring is a 530# competition spring and the sway bar is a lever arm type. Everything has new parts wheel bearings. brakes. Rack. everything. Brake pads are Racing blues. Brake lines are SS and SS braided all new with a dual CNC brake master cylinder and CNC hydraulic clutch. The steering shaft is 4130 steel tubing with quick release steering wheel mounted to chassis in 2 places with 3/4 guides. Engine mounts are included for the 1275. The offset  Fuel cell has never been filled and the wiring is partially completed. the battery box has been fabricated from steel and is next to the driver position. Both rear axles and new bearings are included with Rear disks. Bracket and calibers are not included and would need fitment. Nice car needs to be completed. WILL ACCEPT OFFERS. PLEASE SEND MESSAGE

Also published at eBay.com

Want to buy this car?

Comments and questions to the seller:

from Peter, dated 06 november 2014
Dear seller!

Do you have this AH for sale still?

Please give me a reply!

Thanks in advance!

Best regards

Peter

Name E-mail
Text
Antispam code: (enter the number)

Other classic Austin-Healey cars offered via internet auctions:

Latest arrivals: