1936 International Pickup

 (440) 565-5335(440) 565-5335

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283of83

Full size photosVideo

Full size photosVideo

1936 International Pickup 4882 Miles Yellow/Blue Pickup truck 350 cubic inch V8

Stock #:

118022

Exterior Color:

Yellow/Blue

Interior Color:

Blue leather

Body Type:

Pickup truck

Transmission:

Automatic

Drivetrain:

Rear wheel drive

Fuel Type:

Gasoline

Engine:

350 cubic inch V8

Mileage:

4,882

Beautiful and rare pro-built International pickup. 350 Chevrolet power, TH350 3-speed automatic, power steering and A/C for easy handling, new interior, and steel bodywork. A great little truck that gets the job done, whether the job is cruising or hauling.

You don't see many International pickups from the ‘30s these days, mostly because they were such durable trucks that they were worked until there was just nothing left. Seriously, when was the last time you saw one of these? It has a distinctive look, from the painted grille shell to the upright cab, and despite its status as a work vehicle for most of its life, it's actually quite beautiful. Check out the flowing fenders, the swept-back louvers in the hood that match the angle of the windshield, and the delicate belt moldings that look like they belong on a much more expensive vehicle. Nothing was chopped or modified during the build and it's all steel except the rear fenders, which are slightly wider than stock. The colors are VW Electric Blue over Corvette Daytona Yellow, and the combination is striking, particularly with the bright orange pinstripe separating the colors (dig how it wraps into the door jambs!). A few chrome pieces add just the right amount of 1930s charm and experts will quickly spot the Model A Ford bumpers, which fit almost like they were designed for this truck. Strategic use of spray-on bedliner makes this truck useful, not just a show piece, so you can actually toss stuff in the bed and put it to work on weekends (you'll also note that the raised ribs on the running boards are covered in the same durable material). This is a hobby truck that not only shines at shows but will draw a crowd at the local home store or garden center, too!

The blue leather interior is brand new, stitched by Johnny Miller and far nicer than the original vinyl, rubber, and steel accommodations installed by International. The bench seat makes the most of the cab's compact dimensions so even taller drivers can get comfortable, and a tilt steering column with custom-wrapped billet wheel certainly helps. A custom panel houses an array of white-faced instruments, while a custom panel under the dash neatly camouflages the inner workings and includes vents and controls for the Vintage Air A/C system. The long-handled shifter has a vintage feel and to make this truck feel truly updated, there's a 12V power point and a powerful Kenwood stereo system whose speakers are hidden throughout the interior. Check out the neat little details like map pockets in the doors, custom floor mats with matching blue leather binding, and the beautifully fitted headliner—this was not a cut-rate build by any means.

A truck like this is about reliability, and nothing beats a familiar 350 cubic inch Chevy V8. Rebuilt but not radical, it makes plenty of power to make the truck feel punchy, but it also relaxes and cruises with you when you're not trying to impress anyone. After all these years of selling hot rods, we've come to realize the journey is more important than how quickly you can get there, and this truck's attitude is tailored to match. An Edelbrock carburetor up top, aluminum heads, and an HEI distributor all help balance the performance-to-reliability ratio and make it very easy to live with. You'll also notice block-hugger headers that leave plenty of room for the power steering and A/C plumbing, a dual power master cylinder on the firewall, and a massive radiator up front with an engine-driven fan, which is still the best way to keep your rod cool. It starts with just a few pumps of the accelerator, idles nicely, and pulls the lightweight International around with real vigor. Punch it and it'll spin the tires but go easy and it even pulls down decent fuel economy. Nice!

The frame is still the original International pieces, and given the thick side rails and beefy cross-members, there's no reason to do anything more radical. The front suspension is actually fairly stock, complete with leaf springs and a dropped I-beam axle, while out back there's a GM 10-bolt rear with 3.08 gears inside. A custom dual exhaust system features Thrush glasspack-style mufflers for a great soundtrack and the TH350 3-speed automatic transmission is fortified with a frame-mounted billet cooler. It's simple, which means there's not much to go wrong, and it drives great with a vintage feel and modern performance. Isn't that the point? That awesome stance comes complements of a set of custom-built Wheelsmith aluminum wheels, painted to match the bodywork and fitted with 255/60/17 front and 265/60/18 rear Diamondback whitewall radials.

I know a lot of you guys like the looks of old cars but want the modern comforts like A/C and power steering. Well, this truck delivers. It's sorted, it drives right, and it's always going to be one-of-a-kind at any show you attend. That's what having a cool hobby vehicle is all about. Call today!

Harwood Motors always recommends and welcomes personal or professional inspections of any vehicle in our inventory prior to purchase.

Vehicle Description

Beautiful and rare pro-built International pickup. 350 Chevrolet power, TH350 3-speed automatic, power steering and A/C for easy handling, new interior, and steel bodywork. A great little truck that gets the job done, whether the job is cruising or hauling.

You don't see many International pickups from the ‘30s these days, mostly because they were such durable trucks that they were worked until there was just nothing left. Seriously, when was the last time you saw one of these? It has a distinctive look, from the painted grille shell to the upright cab, and despite its status as a work vehicle for most of its life, it's actually quite beautiful. Check out the flowing fenders, the swept-back louvers in the hood that match the angle of the windshield, and the delicate belt moldings that look like they belong on a much more expensive vehicle. Nothing was chopped or modified during the build and it's all steel except the rear fenders, which are slightly wider than stock. The colors are VW Electric Blue over Corvette Daytona Yellow, and the combination is striking, particularly with the bright orange pinstripe separating the colors (dig how it wraps into the door jambs!). A few chrome pieces add just the right amount of 1930s charm and experts will quickly spot the Model A Ford bumpers, which fit almost like they were designed for this truck. Strategic use of spray-on bedliner makes this truck useful, not just a show piece, so you can actually toss stuff in the bed and put it to work on weekends (you'll also note that the raised ribs on the running boards are covered in the same durable material). This is a hobby truck that not only shines at shows but will draw a crowd at the local home store or garden center, too!

The blue leather interior is brand new, stitched by Johnny Miller and far nicer than the original vinyl, rubber, and steel accommodations installed by International. The bench seat makes the most of the cab's compact dimensions so even taller drivers can get comfortable, and a tilt steering column with custom-wrapped billet wheel certainly helps. A custom panel houses an array of white-faced instruments, while a custom panel under the dash neatly camouflages the inner workings and includes vents and controls for the Vintage Air A/C system. The long-handled shifter has a vintage feel and to make this truck feel truly updated, there's a 12V power point and a powerful Kenwood stereo system whose speakers are hidden throughout the interior. Check out the neat little details like map pockets in the doors, custom floor mats with matching blue leather binding, and the beautifully fitted headliner—this was not a cut-rate build by any means.

A truck like this is about reliability, and nothing beats a familiar 350 cubic inch Chevy V8. Rebuilt but not radical, it makes plenty of power to make the truck feel punchy, but it also relaxes and cruises with you when you're not trying to impress anyone. After all these years of selling hot rods, we've come to realize the journey is more important than how quickly you can get there, and this truck's attitude is tailored to match. An Edelbrock carburetor up top, aluminum heads, and an HEI distributor all help balance the performance-to-reliability ratio and make it very easy to live with. You'll also notice block-hugger headers that leave plenty of room for the power steering and A/C plumbing, a dual power master cylinder on the firewall, and a massive radiator up front with an engine-driven fan, which is still the best way to keep your rod cool. It starts with just a few pumps of the accelerator, idles nicely, and pulls the lightweight International around with real vigor. Punch it and it'll spin the tires but go easy and it even pulls down decent fuel economy. Nice!

The frame is still the original International pieces, and given the thick side rails and beefy cross-members, there's no reason to do anything more radical. The front suspension is actually fairly stock, complete with leaf springs and a dropped I-beam axle, while out back there's a GM 10-bolt rear with 3.08 gears inside. A custom dual exhaust system features Thrush glasspack-style mufflers for a great soundtrack and the TH350 3-speed automatic transmission is fortified with a frame-mounted billet cooler. It's simple, which means there's not much to go wrong, and it drives great with a vintage feel and modern performance. Isn't that the point? That awesome stance comes complements of a set of custom-built Wheelsmith aluminum wheels, painted to match the bodywork and fitted with 255/60/17 front and 265/60/18 rear Diamondback whitewall radials.

I know a lot of you guys like the looks of old cars but want the modern comforts like A/C and power steering. Well, this truck delivers. It's sorted, it drives right, and it's always going to be one-of-a-kind at any show you attend. That's what having a cool hobby vehicle is all about. Call today!

Harwood Motors always recommends and welcomes personal or professional inspections of any vehicle in our inventory prior to purchase.

Vehicle Warranty

WARRANTY

ALL VEHICLES ARE SOLD "AS-IS, WHERE-IS", and Harwood does not in any way, expressed or implied, give any warranties to Buyer. Harwood expressly disclaims any implied warranties of merchantability or of fitness for a particular purpose. No statements in Harwood's advertising whether in print or online shall be deemed to create a representation of a warranty.

About Harwood Motors

ABOUT HARWOOD MOTORS

Harwood Motorsoffers enthusiasts an effortless way to buy and sell collector vehicles. Matt and Melanie have years of experience buying, selling, and collecting vintage automobiles. We are a family business with close ties to the hobby itself and we like to think of ourselves as matchmakers rather than a mere car dealership. There's a right car for you out there, and we can help you find it, even if you don't particularly know where to start. What Harwood Motors does isn't new, but the way we do it will make you a client for life, whether you're a buyer or a seller. Call us any time to talk cars, trucks, or even just about the hobby in general; you'll be surprised to find you already have a friend.

If you have a special car that you would like to market, Harwood Motors can put it in front of real buyers. We have an extensive network of clients who are always looking for their next special vehicle.  Please contact us for more information on any of our programs.

Feel free to contact us at any time using [email protected] or by phone at 440-565-5335.

ABOUT HARWOOD MOTORS

Harwood Motorsoffers enthusiasts an effortless way to buy and sell collector vehicles. Matt and Melanie have years of experience buying, selling, and collecting vintage automobiles. We are a family business with close ties to the hobby itself and we like to think of ourselves as matchmakers rather than a mere car dealership. There's a right car for you out there, and we can help you find it, even if you don't particularly know where to start. What Harwood Motors does isn't new, but the way we do it will make you a client for life, whether you're a buyer or a seller. Call us any time to talk cars, trucks, or even just about the hobby in general; you'll be surprised to find you already have a friend.

If you have a special car that you would like to market, Harwood Motors can put it in front of real buyers. We have an extensive network of clients who are always looking for their next special vehicle.  Please contact us for more information on any of our programs.

Feel free to contact us at any time using [email protected] or by phone at 440-565-5335.

Contact us for more details

(440) 565-5335(440) 565-5335

Terms and Conditions

Payment Options

We accept the following payment methods:
- Cashier's Check/money order
- Loan check from eBay Financing Center
- Cash (in person)
- Personal check (once cleared)

Vehicle Pickup & Shipping

All shipping charges are buyer's responsibility.

Finance, Warranty, Shipping question?

Call the dealer at (440) 565-5335

General Terms

TERMS AND CONDITIONS

While we do our best to present all vehicles as honestly and accurately as possible, Harwood Motors Ltd. cannot guarantee the veracity of the information contained herein. This site and all advertising information may be updated without notice whenever new information is obtained and may contain mistakes and inaccuracies. Information is provided to the best of our knowledge and that of the owners of the vehicles, and we make no warranty or representation regarding the accuracy, truth, suitability, or reliability of such information. We cannot be responsible for any errors, omissions, or inaccuracies contained in information provided by third parties. Harwood Motors Ltd. is not an expert in the construction, metallurgy, engineering, finishes, materials, and componentry of every single vehicle ever made. Harwood Motors Ltd. strives to perform extensive visual inspections on all vehicles we represent but we do not disassemble vehicles or components for inspection purposes and therefore it is always possible that there is hidden damage that is not readily apparent. We cannot guarantee the fitness of any components beyond a visual inspection and normal operation of the vehicle. We do not perform internal examinations, so we cannot guarantee the condition of unseen internal components such as crankshafts, bearings, gears, and other mechanical equipment. This also applies to electronics such as radios, clocks, gauges, light fixtures, switches, or other electrical devices. Buyer should personally inspect the vehicle and satisfy himself as to its mechanical and cosmetic fitness. We always welcome inspections by Buyers and/or third parties who wish to undertake such examinations at their own expense. Harwood makes no warranty or representation regarding mileage unless otherwise stated. Listed prices do not include additional fees, state, federal, or local taxes, or shipping and delivery costs. Harwood Motors Ltd collects a $150.00 documentation fee on every vehicle purchase. Buyer is entirely responsible for satisfying himself that the car is as-represented prior to purchase and there are no warranties, expressed or implied, involved in the sale of any motor vehicle represented by Harwood Motors Ltd.

PAYMENT AND SHIPPING

A non-refundable PayPal deposit is required within 24 hours of the auction's end, or immediately for those buyers using the "Buy It Now" feature. Please see vehicle listing for the required amount. For final payment, we accept certified bank checks, and bank to bank wire transfer of funds. We will also accept your credit union or bank auto financing check from any reputable institution. Please contact us for financing options. Note that no vehicle ships without payment in full clearing our bank.

The Buyer is responsible for pickup and/or shipping of the vehicle. If you wish to have it shipped we will gladly assist you in making arrangements and work with several large shipping companies to deliver cars all over the world. Please contact us for details.

Fees and Taxes

FEES AND TAXES

The buyer is responsible for all local state, county, and city tax fees, as well as title and registration fees and any other costs that may apply, and Harwood Motors charges a $150 document preparation fee on each transaction.

Also published at eBay.com

Want to buy this car?