Classic Cars / Auburn / Car for sale

1928 Buick

Sale price: $17,000.00 make an offer

Sale type: Fixed price listing

Technical specifications, photos and description:

Year:
1928
Mileage:
9,999,999
Engine:
233 Buick Straight Eight
Got questions?
Ask here!

1928 Buick for sale

Current customer rating: current rating for this car(2.15) based on 363 votes
1928 Buick Speedster   ( Re-creation )
The origin of this Speedster project began as a 1928 Buick Series 20 Sedan which has been re-styled to resemble an early teens Indy car or Vanderbilt style racer.
The frame . steering box / column . brakes . firewall / cowl . hood . seats . and wooden spoke wheels are original  1928 Buick. Frame serial number tag is mounted behind the battery box . and the body style tag number is mounted on the firewall.
Car was formerly on display in the Pioneer Auto Museum in Murdo . SD . at which time the basic speedster 're-styling" conversion had already been accomplished.  I acquired the car in Sept. 2009 and began the reconstruction process in Red Oak . Iowa . including rear frame improvements . rear tube axle replacement . rear 4 link style suspension . minor body work & paint . pin-striping . and custom leather upholstery.
The original 4 cylinder motor had already been replaced with a 1936 Buick 233 cu. in. straight eight with open 8 tube header . nbsp; mated to a mid 50's Saginaw 3 speed manual transmission. Shifting by means of the external "gated" shifter located outside the driver's seat. The ratchet parking brake linkage was never connected below . but I've never needed it to function.  Twin drive chains are "R-100" roller chains with sprockets on both sides of the automobile. An intermediate limited slip diff modified with sprockets . transfers power to the rear wheels by means of the chains ( which are easily removed with cotter pins ).  
I then brought the car down to Houston for the extensive cosmetic and detailing upgrades . with a complete new 12 volt labelled "E-Z Wiring" style wiring harness routed thru vintage style asphalt wire loom . soldered connections and marine grade shrink tubing. The fuse panel is now conveniently located below the driver's ( right side ) seat cushion. A heavy duty power on / off switch" is mounted on the firewall.
The ignition switch and heavy duty Unimog signal switch are located between the seats.
Extensive time and effort was spent locating all the brass and copper detailing . then having it all professionally bright polished & industrial grade clear-coated specific for brass and copper.
Motor is now fueled with a new electric fuel pump . fuel pressure regulator and two new Speedway 97 carbs through polished copper fuel lines and braided copper hose.  Motor runs strong and starts quick . for the added lead . I run it on a blend of pump fuel and C12 race fuel with 110 octane . and a splash of Marvelous Mystery Oil . the sound is magical . and for the piston heads out there . the aroma is fantastic .  
The originally mounted brass chain driven "K-W" Magneto was not functional therefore disconnected . but retained and polished for aesthetics and replaced with a new distributor cap and "Pertronics" ignition system.
The original rad is clean and without issues . an extra large capacity solid brass vintage heavy equipment overflow tank has been added. Motometer works.
All lighting systems and signals have been upgraded to modern sockets and bulbs . including the large vintage brightly polished"Rushmore" marine search light with polished interior mirror.
All the previous woodwork was removed . retained for template purposes if applicable. and replaced with one inch thick solid oak with several coats of hand rubbed stain and Danish Oil for a rich deep luster. The dash panels are also built from scratch using oak veneer plywood with sold oak overlay panel. Polished re-cast Buick foot-plates help protect the oak floorboards and side steps.  
The vintage aluminum instrument cluster panel is an original casting by the "Northwestern Motor Company" known for producing aviation tugs during    WW-II.  The aluminum has been carefully refinished to resemble oil rubbed bronze. All gauges are new "Dolphin" gauges. Speedo is not currently connected.
The solid brass vintage windshield brackets from a antique Chris Craft have also been bright polished and clear-coated . Modern automotive glass is used for the windshield.
Original steering column is covered with a polished solid brass tube. The solid brass "Cobra Head" Bulb horn if fully functional.
Main fuel tank is a 45 gallon solid copper riveted tank with 1/8" thick outer shell has been sealed internally . and a vintage brass flip-top filler neck has been installed. The level sight glass is extra heavy wall industrial grade tempered tubes with 7/8" OD and 5/16" wall thickness.   The tank rests on (4)- 2 1/2" thick solid oak saddles . held in place by stainless steel strapping with 2 1/2" wide heavy leather straps with brass buckles. Oak saddles are bolted thru a 6" steel C-channel hidden below the 1" thick oak plank decking.  Readily available "Viton" O-rings" . and fuel line are all that's required to make this tank fully functional .  There is a convenient existing threaded bung to complete the fuel line connection.  Car is currently fueled by the small brass tank behind the Model T battery box.
The original wood spoke wheels are very solid and tight despite their age . and the tires all hold air without leaks. The spare wheel is for display purposes and is mounted utilizing an early 30's Plymouth spare tire carrier . by means of a custom machined spindle and a polished solid bronze cap from an antique fire hydrant . I just like the looks .  
The very strong and secure seat belts are courtesy of a Huey helicopter.
Mechanical drum brakes are far more effective than one would expect . and scrub speed very well.
This would make an ideal parade car or for quiet country road enjoyment with family or grand-kids. This automobile receives huge amount of attention everywhere it goes whether it's on a trailer . in a vintage car event . or certainly driving down the road.  
Car comes with full clear title . correct and verified by local law enforcement.
The following items also come with this car : All applicable manuals . wood templates for dash and windshield glass . one CD containing large collection photos the full reconstruction process and applied parts used in the build. original historical documentation from it's early years on display in the Pioneer Auto Museum in Murdo . SD. Also included are ( 2 ) rare limited edition beautifully detailed monogrammed Indianapolis 500 - 100th Anniversary Jackets with the Marmon Wasp - the winner of the first 1911 Indy  . driven by Ray Harroun. They are sized "Medium" &  "Extra Large" - both are flawless. worn only once and fit bigger than the sizes indicate. Vintage .  WW-II Japanese fighter pilot leather gauntlet gloves with leather cap and brass framed racing goggles . I'll let you come up with the rest of the "period" attire.
All shipping logistics and arrangements are provided strictly by the buyer. I can assist preparing the car for shipping.  Vehicle retrieval and shipping by agreed arrangements only.  
Nothing moves until payment is received and cleared in full ( within 4 business days of the end of this listing unless alternate arrangements are mutually agreed upon ).
Payment made by means of : Cash or Certified Check . PayPal.  I can hold the car for up to a maximum of three weeks after the sale. if required.
I have attempted to present this car as clearly as possible through the above narrative and attached detailed photos.  I also take my longstanding excellent Ebay rating very seriously . therefore tire kickers and bids from buyers with bad feedback will not be accepted.  Overseas bidders accepted or rejected upon my discretion. I'll do my best to answer questions asap.  My home email : CanuckinKirkuk@yahoo. com My cell & text:    (two8one) 6eight2-8five4eight
For clarification on terminologies: This is not a "restoration" in the true sense of the word . since this "Style" was not an originally factory produced Buick automobile . it is an extensively "detailed re-creation" . therefore I kindly request that I not get questions about "Numbers Matching" ( other than the matching frame serial number and cowl body plate ) . or "What's the original mileage ?"
This car is also listed locally and I therefore reserve the right to end this listing at any time.  
Stearman Bi-plane not included .
No trades . no refunds.
New Note: ( May 19-2017 ) Thanks to recent information kindly provided by a Facebook observer I was advised just this week . that the car was originally created by the late Mr. Stacey Breckenridge of Auburn. CA.  Stacey was very well known in the world of extreme off road and rock crawling on the west coast .   Here's a few new pieces of technical background that went into the original build :  the drive axle is from an early Jeep . the gated shifter / lever brake / foot brake & clutch pedals are from a 1915 Studebaker . the "K-W" mag came from a vintage Curtis V-8 aircraft . the front axle is 'likely' Franklin . the grill shell and rad are 1927 Buick.  
I can only hope that Stacey looks down favorably upon my transformation of his original build.


Thanks for reviewing this listing .


Here are two brief YouTube clips :  

https://www. youtube. com/watch?v=0vzIw0CHBrk

https://www. youtube. com/watch?v=uEX9h3F8NKk



Also published at eBay.com

Want to buy this car?

Comments and questions to the seller:

Name E-mail
Text
Antispam code: (enter the number)

Other classic Auburn cars offered via internet auctions:

Latest arrivals: