ARE YOU PLANNING AN ENGINE CONVERSION, PLEASE READ.
Sale price: £100.00 make an offer
Technical specifications, photos and description:
EXHAUST MANIFOLDS . CO . UK
If you have any questions. please message us.
IF YOU ARE CONSIDERING OR PLANNING AN ENGINE SWAP OR BUILDING A CLASSIC CAR TO SHOW? THE BIGGEST PROBLEM IS THOSE BIG OLD CAST IRON EXHAUST MANIFOLDS.
WE FABRICATE EXHAUST MANIFOLDS COPYING THE ORIGINAL ONES.
THE PROCESS IS QUITE COMLEX AND EXPENSIVE FOR A ONE OFF DESIGN BUT FOR SOMETHING THAT WE CAN REFABRICATE OVER AND OVER THE PRICE COMES DOWN.
FIRST WE HAVE TO CUT A COPY OF THE PORT HOLES AND STUD HOLES TO A PIECE OF CLEAR PERSPEX.
WE THEN DESIGN THE FLANGE PLATE ON A PIECE OF PAPER.
WE THEN TRANSFER THE TWO TO A PIECE OF ONE MILLIMETRE SHEET STEEL.
THIS THEN GOES TO A MACHINE SHOP TO BE COPIED TO A CAD PROGRAMME AND SENT TO A LASER CUTTING MACHINE.
THE FLANGES ARE CUT IN 8 MILL 304 STAINLESS STEEL.
WE THEN MAKE A JIG OF YOUR OLD MANIFOLDS.
WE THEN MAKE A MOCKUP OF A DESIGN IN PLUMBERS/DIY WASTE PIPE.
WE THEN MAKE THIS MOCKUP IN 1. 5 MILL POLISHED 304 STAINLESS STEEL.
THIS IS THEN TIG. MIG OR STICK WELDED.
THE EXTENT OF SANDING AND POLISHING IS THEN DOWN TO BUDGET.
We could if you prefer sell you a set of Flange plates with rings attached to design your own manifolds using plumbers 1 and 3/4 inch waste pipe.
THE £100. 00 BUY IT NOW IS A DEPOSIT TOWARDS YOUR ORDER.
WE CAN ONLY PRODUCE 3 SETS OF MANIFOLDS PER WEEK WHILST WORKING ON NEW DESIGNS. WE HAVE 9 SETS OF MANIFOLDS ON ORDER.
BE THE ENVY OF YOUR FRIENDS AND OTHERS AT CAR SHOWS.
We can design and manufacture any type of Exhaust Manifold/Header.
To manufacture a Manifold we have to make a template as in our images. this can be done by copying an existing manifold. we can then modify this to your requirements.
Please see our other listings for Exhaust Manifolds that we have fabricated and ones that we are working on. Tell your friends on forums and clubs about us to receive a discount yourself.
* Instructions are NOT included.
* Professional installation is recommended!
* Fitting is NOT included.
We keep being asked what is the cost of a manifold/header.
This depends on all sorts of factors but on average £150. 00 in Stainless steel. We will need your Manifold/Header as a template unless we already stock one.
WE ARE DEVELOPING OUR WEBSITE www. exhaustmanifolds. co. uk
DITCH THE OLD CAST IRON MANIFOLDS.
BIG HEAVY THINGS.
CURRENTLY WE ARE ON A ONE MONTH TIME SCALE FOR FABRICATION AND DELIVERY.
_gsrx_vers_632 (GS 6. 9. 8 (632))
Also published at eBay.co.uk
Want to buy this car?
Comments and questions to the seller:
Other classic AC Cars cars offered via internet auctions:
price: £1,120.00Mercedes SLC - 450 V8 - Classic 1978 w107 R107
price: £9,750.001941 chevrolet half ton truck
price: £495.00MERCEDES 200 1977
price: £1,000.00PEUGEOT 205 1.4 CJ CABRIOLET JUNIOR CONVERTIBLE 1991